Publications
  1. Wang Deqing and Ludo Froyen: Study of In-Situ Process in Al-TiO2-B2O3 system during Synthesis of Particle-Reinforced Aluminum Matrix Composite by Differential Thermal Analysis, To be forthcoming.
  2. Wang Deqing and Ludo Froyen: Synthesis of Alumina-Aluminum Composite by Alumino-thermic Reduction of Silica, To be forthcoming.
  3. Wang Deqing and Ludo Froyen: In-Situ formations in Al-TiO2, Al-B2O3 and Al-TIO2-B2O3 systems by Powder Metallurgy, To be forthcoming.
  4. Wang Deqing and H. F. Lopez: Effect of Thermal Gradients on The Nucleation of Primary Phases in Al-4% Si Composite, J. Mater. Sci. Tech., 6 (1998) 1, pp. 27-34.
  5. Wang Deqing: Mechanical Engineering Materials, Chapter 3 and 5, edited by Shi Ziyuan and Wu Qingji, China Railway Publisher, ISBN 7-113-02951-5, pp. 25-36 and pp. 54-69.
  6. Shi Ziyuan, Gao Hong and Wang Deqing: Low Temperature Quenching of Nitriding Steel, Surface Technology, Vol. 27 (1998) No. 2, pp. 20-21.
  7. Shi Ziyuan, Wang Xuezhi and Wang Deqing: Study on Surface Dispersion Strengthening of Al2O3 on Cu, Trans. of Metal Heat Treatment, Vol. 18 (1997) No. 4, pp. 32-36.
  8. Shi Ziyuan and Wang Deqing: Study of Lamellar Carbide M23C6 Precipitation of Fe-25Cr-20Ni Alloy, Journal of Dalian Railway Institute, Vol. 18 (1996) No. 2, pp. 79-83.
  9. Shi Ziyuan Zhang Minglu and Wang Deqing: Chromizing of Carbon Steel in Salt Bath, Surface Technology, Vol. 26 (1997) No. 6, pp. 28-30.
  10. Wang Deqing and H. F. Lopez: Effect of Austempering on Wear Properties of Boron Cast Iron, AFS Transactions, (1996) No. 141, pp. 109-114.
  11. Shi Ziyuan and Wang Deqing: Model GB High Temperature Oxidization and Decarbonization Preventing Coating, Surface Technology, Vol. 25 (1996) No. 3, pp. 46-47.
  12. Shi Ziyuan, Wang Deqing and Gao Hong: The Fabrication of Al2O3-Cu Matrix Composite, Materials for Mechanical Engineering, 20 (1996) 6, pp. 46-47.
  13. Shi Ziyuan, Wang Deqing and Gao Hong: Glass Based Coating for Preventing Oxidation and Decarbonization at High Temperature, Materials Protection, Vol. 29 (1996) No. 6, pp.12-13.
  14. Wang Deqing and H. F. Lopez: Morphological and Kinetic Aspect of The Thermal Oxidation of SiC-Whisker Reinforced Al2O3, Journal of Materials Science and Technology, Vol. 10 (1994), pp. 879-885.
  15. Wang Deqing and H. F. Lopez: The Role of Epsilon-Martensite on Impact Toughness of Fe-17Mn Alloy, Journal of Materials Science, Vol. 29 (1994), pp. 4399-4403.
  16. Wang Deqing and H. F. Lopez: Surface Scaling in SiC-Whisker Alumina under Flowing Hydrogen at 1300-1500 oC, Journal of the European Ceramic Society, Vol. 13 (1994) No. 6, pp. 251-263.
  17. Hugo F. Lopez and Wang Deqing: High Temperature Degradation of SiC-Reinforced Alumina in Hydrogenous and Oxidant Environments, presented on The 8th World Ceramic Congress and Forum on New Materials (July 2-4, 1994, Faenza, Italy).
  18. Wang Deqing and H. F. Lopez: Interfacial Cracking During Thermal Oxidation in A 30 Vol % SiC-Whisker Reinforced Alumina, Materials Letters, Vol. 16 (June 1993) No. 6, pp. 313-316.
  19. Wang Deqing and H. F. Lopez: Degradation of A SiC-Reinforced Alumina in H2 at 1300-1500 oC, Proceedings of The Third Conference of European Ceramic Society, Madrid, Spain, 1993, Vol. 3, pp. 955-960.
  20. Wang Deqing and H. F. Lopez: High Temperature Oxidation Kinetics of A SiC-Whisker Reinforced Al2O3, ICCM/9 Ceramic Matrix Composites and Other Systems, Proceedings of Ninth Intentional Conference on Composite Materials (12-16 July, 1993, Madrid, Spain) Vol. 2, pp. 153-160.
  21. P. K. Rohatgi, C. S. Nath and Wang Deqing: Temperature Differences between Model Cylindrical Rods and Alloys Solidifying around These Rods, Microstructure Formation During Solidification of Metal Matrix Composites (ed. P. K. Rohatgi, TMS Publication, 1993), pp. 149-160.
  22. Wang Deqing: Epsilon Martensite and Its Effect on Impact Toughness of Fe-17Mn Alloy, presented at 1989 International Cryogenic Materials Conference (July 24-29, 1989, University of California Los Angeles, California, USA).
  23. Wang Deqing and Li Longsheng: Effect of Grain Morphology and Grain Size on Mechanical Properties of High Manganese Austentic Steel for Cryogenic Use, Advances in Cryogenic Engineering Materials, Vol. 34 (1988) pp. 309-316, Plenum press, New York.
  24. Wang Deqing and Li Longsheng: Effect of Grain Morphology and Grain Size on Mechanical Properties of High Manganese Austenitic Steel for Cryogenic Use, An invited paper presented at 1987 International Cryogenic Materials Conference (June 14-18, 1987, Pheasant Ron Resort, St. Charles, Illinois, USA).
  25. Wang Deqing: The Toughing Treatment of Fe-Mn-0.lC Steel, Heat Treatment of Metals, Vol. 4 (1987), pp. 35-39.
  26. Wang Deqing and Li Longsheng: The Effect of Crystallized Morphology and Grain Size on Mechanical Properties Of A High Manganese Austenite Steel, Journal of Dalian Institute of Technology, Vol. 25 (1986) No. 3, pp. 99-103.
  27. Wang Deqing: Effect of Hammer Edge Sizes of Impact Test Machine on Impact Toughness of Austentic Steels, Physical Testing and Chemical Analysis A, (1986) No. 3, pp . 29-31.
  28. Wang Deqing: Structures and Properties of High Manganese Austenite Steels, Low Temperature and Special Gases, (1984) No. 3, pp. 27-37.
  29. Wang Deqing and Shi Ziyan: The Synthesis of Al203 Particle Reinforced Al-Si Composites by Reduction of Silica, to be published in Composite Materials.
  30. Wang Deqing and H. F. Lopez: The Difference in Temperature between Melt and Model Dispersoid Surface during Solidification of Aluminum Alloys, to be forthcoming.
  31. Wang Deqing, Shi Ziyuan and Gao Hong: The Study of Synthesis of Lead-Fly Ash Composites, to be forthcoming.
  32. Wang Deqing, Shi Ziyuan and Gao Hong: The Preparation and Tensile Strength of A Continuous Carbon Fiber Reinforced Aluminum Matrix Composite, to be forthcoming.
  33. Shi Ziyuan, Wang Deqing and Gao Hong: The Preparation of Al2O3-Cu Matrix Composite by Internal Oxidation, to be forthcoming in Zeitschrift fur Metallunde.
  34. Shi Ziyuan and Wang Deqing: Alumina Particles in Copper Matrix Formed by Aluminizing and Internal Oxidation, to be forthcoming.
  35. Shi Ziyuan, Wang Deqing and Gao Hong: The Study of Electroless Deposit of Nickel on Graphite Fibers, to be forthcoming.